Apogee Symphony 64 User's Guide download pdf (Page 7)

APOGEE ELECTRONICS

Symphony64 PCI card – User’s Guide

To install the Symphony 64 PCIe card in your Apple Mac computer:



•

First,unplugtheMac’sACcableasasafetyprecaution.

• Remove the Mac’s side cover.

• Unscrew and remove the Mac’s PCI bracket (see the illustration below).

• Holding the Symphony PCIe card by its corner, align the card's connector with the desired PCI slot

and press the card rmly into place until the gold pins of the edge connector are just visible. If the

card does not slide into place with minimal effort, remove the card, check alignment, and check for

foreign objects.

Don’t force the card into place.

• If you’re installing two Symphony 64 PCIe cards, install the “Master” card in the slot closest to the

video card slot.

• Re-install the PCI bracket to secure the Symphony 64 card.

• If two Symphony 64 cards have been installed, connect the supplied ribbon cable between each

card as shown below, making sure to align the key on the ribbon cable connector to the slot on the

card socket. Three connectors are present on the ribbon cable, but use the connectors at each end.

• Re-install the Mac’s side panel.

Port access opening

PCI Express slot

PCI bracket

Brace

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

No comments

Apogee Symphony 64 User's Guide Page 7